How To Hack Wifi WPA WPA2 WPS In Windows In 2 Mins Using JumpStart And Dumpper

How To Hack Wifi WPA WPA2 WPS In Windows In 2 Mins Using JumpStart And Dumpper

Hello Friends Welcome To Hacking Dream

Today I am going to share a wonderful hack on Wifi, using this we can hack a wifi WPA/WPA2 – WPS within seconds, the easiest and best way to Hack wpa networks.

THIS IS FOR EDUCATIONAL PURPOSE ONLY,I AM NOT RESPONSIBLE FOR ANY ILLEGAL ACTIVITIES DONE BY VISITORS, THIS IS FOR ETHICAL PURPOSE ONLY

   Click Here To Learn All Methods And Types of Wifi Hacking

What is WPA/WPA2 :

Wi-Fi Protected Access (WPA) and Wi-Fi Protected Access II (WPA2) are two security protocols and security certification programs developed by the Wi-Fi Alliance to secure wireless computer networks. The Alliance defined these in response to serious weaknesses researchers had found in the previous system, WEP (Wired Equivalent Privacy).

WPA became available in 2003. The Wi-Fi Alliance intended it as an intermediate measure in anticipation of the availability of the more secure and complex WPA2. WPA2 became available in 2004 and is a common shorthand for the full IEEE 802.11i (or IEEE 802.11i-2004) standard.

A flaw in a feature added to Wi-Fi, called Wi-Fi Protected Setup, allows WPA and WPA2 security to be bypassed and effectively broken in many situations. WPA and WPA2 security implemented without using the Wi-Fi Protected Setup feature are unaffected by the security vulnerability.

WPA2 has replaced WPA. WPA2, which requires testing and certification by the Wi-Fi Alliance, implements the mandatory elements of IEEE 802.11i. In particular, it includes mandatory support for CCMP, an AES-based encryption mode with strong security. Certification began in September, 2004; from March 13, 2006, WPA2 certification is mandatory for all new devices to bear the Wi-Fi trademark.

 What Is WPS :

Wi-Fi Protected Setup (WPS; originally Wi-Fi Simple Config) is a network security standard that attempts to allow users to easily secure awireless home network but could fall to brute-force attacks if one or more of the network's access points do not guard against the attack.

Limitations For Using This Hack :

1)     This Hack works on Wpa/Wpa2 – Wps Unlocked Networks only

2)    Does not work on Costly Routers, So cannot hack all the wifi networks Available near you.
3) Not all Networks or routers can be hacked using this method.
4) While hacking some networks it says "Wireless Configuration Failed " that means jumpstart can not hack that particular network.

Many people asked me, is there any to hack wifi Wpa and Wpa2 through Windows, So Here is the article for Hacking Wifi Wpa/Wp2 Networks Through Windows also in Few minutes

Requirements:

1)     Laptop or USB wifi Adapter

2)     Windows Operating System

3)     Wincap

4)     JumStart

5)     Dumpper

6)     NetFrameWork 4.5

7)     Wpa/Wpa2 – WPS Networks Available with at least 8% signal

Links to Download the Required Software’s

Wincap – Direct Download    One Drive

JumpStart –  Direct Download   One Drive

Dumpper – Direct Download     One Drive

NetFrameWork 4.5 – Direct Download 

Download and Install all the Above Given Software’s one by one, even If a single software is missing out hack cannot be successful, be careful in downloading and installing these software’s.

Now Here I Start Our Tutorial on Hacking Wifi WPA/WAP2 – WPS Networks  In Windows Using JumpStart And Dumpper

Tutorial To Hack Wifi WPA/WPA 2 - WPS Networks

1)     After Downloading and Installing all the Software’s Open Dumper (No need of Installing Dumper, whenever you want to hack open it )

2)      Select your Network Adapter Now Click on “Scan”, There you can see all the available Wifi Networks

3)     Now Move on to the “WPS” Tab

4)     Select “All Networks”

5)     Now Click on “Scan”

6)     Select a Network That You Want Hack

7)     Now Click On Start JumpStart

8)     JumpStart Will Automatically Start The Process And Complete The Hack

9)     Now The Hack is Completed, You are already connected to the network that you Hacked

10)Click on “Profiles” to see the Details and Passwords of the wifi Networks That You Hacked

11)Select  a Network and There you can find  the details and passwords of the networks that you hacked

12)There is another method to see the password of the network that you hacked

13)Right click on the Networks and select “Open Network and Sharing Center”

14)Now click on the “Connection: Network Name”

15)Then the Properties of the Connected Network Will Appear, Now select “Wireless Properties”

16)Now move to “Security” Tab

17)Mark On “Show Characters” and the Password of the Wifi Network is Shown

                         This is how a Wifi WPA/WPA2-WPS Network is hacked. 

                     
            

This is the Simplest Method ever that too in windows, till now I did not post wifi hacking through windows, this is my very first post on Wifi Hacking through Windows, all my other Wifi Hacking articles are hacking through Kali Linux

Here is the link to Check all my Wifi Hacking Methods In Kali Linux

Normally some of the wifi networks cannot be hacked through this method, this method has many limitations. So I want to show you all a very Perfect Easy way of hacking Wifi WPA/WPA2 – WPS (Locked And Unlocked). My Next Article Is on Hacking Wifi WPA/WPA2 So Don’t Miss It

Subscribe To Our Low Volume Newsletter, so that you will not miss my Ultimate Hacking Method, Enter Your Name And Email Below, so that I can send you Email on my Next Post. Enjoy Hacking, Have a Great Time Hacking.

Frequently Asked Questions:

1) Does This method actually work?? 

Ans: Yes, it works, but not on all kinds of networks and routers. As i mentioned in the above article using jumpstart you can hack only wifi routers secured with wpa/wpa2 - wps enabled

2) Jumpstart it shows Wireless configuration failed!..what could be the reason for it not to be successful? 

Ans: Same answer as above, because it is not programmed to hack advanced routers. To put it into simple words, router is much more stronger than the attack 

3) Hacking With JumpStart Failed, how should i hack this particular network now ??

Ans:  By trying this method, many people might think that hacking is very easy, by using software we will be able to hack any kind of software, but its not true. Hacking is not easy at all. There are many other methods to hack wifi, but not a lot of methods though windows. This is the very basic method of hacking. we need to go into a little advanced methods of wifi hacking to hack the security system of present day routers

In case Jumpstart Failed to hack the router try the following (Hacking With Linux)

for wpa/wap2 - WPS Enabled ---->>>  Hacking wifi using reaver in Kali Linux
For Brute Force Attack ---->>>> Hacking Wifi Using Wordlist
All methods and Types of Wifi hacking --->>> Click Here (select any method and try it, i am sure you can hack any kind of network using these methods)

Source: http://www.hackingdream.net/2015/05/hack-wifi-wpa-wpa2-wps-in-windows-in-2.html